WR-1004N-HJS outdoor optical node can be configured 2 forward path optical receiver modules, 2 return path optical transmitter modules, 1 Ethernet transponder module and 2 switching power supply modules at most. Adopts advanced optical AGC technology, the output level and output slope both adopt the electric control circuit. Add LED segment display function, the forward path output signal ≥116dBμV.
* Forward path optical receiving part adopts advanced optical AGC technology, the input optical power range extended to -8～+2dBm.
* Forward path optical receiving part: RF operating bandwidth extended to 1GHz, each way maximum output level up to 116dBμv.
* Full electric adjust attenuation and equilibrium control circuit, and achieve remote operation by NMS.
* RF amplifier part adopts quick plug modular design, can quickly replace RF amplifier module without dismantling the RF cable connector.
* Built-in perfect condition monitoring circuit, and support Ethernet transponder.
* Reserved C-CMTS forward path and return path RF interface, support DOCSIS EOC networking scheme.
|
Item |
Unit |
Performance Parameters |
|
|
Forward Optical Receive Part |
|||
|
Optical Parameters |
|||
|
Optical AGC control range |
dBm |
-8 ~ +2 |
|
|
Optical return loss |
dB |
>45 |
|
|
Optical receiving wavelength |
nm |
1100 ~ 1600 |
|
|
Optical connector type |
— |
FC/APC, SC/APC or specified by the user |
|
|
Optical fiber type |
— |
Single mode |
|
|
Link Performance |
|||
|
C/N |
dB |
≥ 51 |
-1dBm optical input, output level 108dBμV, EQ 8dB |
|
C/CTB |
dB |
≥ 65 |
|
|
C/CSO |
dB |
≥ 60 |
|
|
RF Parameters |
|||
|
Frequency range |
MHz |
45/87 ~862/1003 |
|
|
Flatness in band |
dB |
±0.75 |
|
|
Rated output level |
dBμV |
≥ 110 |
|
|
Max output level |
dBμV |
≥ 116 |
|
|
Output return loss |
dB |
(85 ~550MHz) ≥16 / (550~1000MHz) ≥14 |
|
|
Redundant receiver isolation |
dB |
≥75 |
|
|
Output impedance |
Ω |
75 |
|
|
Electrical control EQ range |
dB |
0～15 (1dB stepping) |
|
|
Electrical control ATT range |
dB |
0～20 (1dB stepping) |
|
|
Reverse Optical Transmit Part |
|||
|
Optical Parameters |
|||
|
Optical transmit wavelength |
nm |
1310±10, 1550±10 or specified by the user |
|
|
Laser type |
— |
DFB or FP laser |
|
|
Output optical power |
mW |
1 |
|
|
Optical connector type |
— |
FC/APC, SC/APC or specified by the user |
|
|
RF Parameters |
|||
|
Frequency range |
MHz |
5 ~ 65 (or specified by the user) |
|
|
Flatness in band |
dB |
±0.75 |
|
|
Input level |
dBμV |
72~ 85 |
|
|
Input return loss |
dB |
≥16 |
|
|
Independent transmitter isolation |
dB |
≥60 |
|
|
Input impedance |
Ω |
75 |
|
|
NPR dynamic range |
dB |
≥15 (NPR≥30 dB) Use DFB laser |
≥10 (NPR≥30 dB) Use FP laser |